|
The
ACCUFAST KT is a feature rich basic tabbing machine. It uses plain
circular or rectangular tabs either opaque or clear. It tabs pieces
up to 1/4" in thickness and it rolls the waste up on a take up
spool. At speeds of 15,000 per hour or so, it is a stretch to refer
to the ACCUFAST KT as a basic tabber - there's a lot of the
professional in the KT.
|
- applies 1 tab per piece
- tabs 15,000 pieces per
hour
- tabs pieces 5" to
12" wide, from 20 lb. thin to 1/4" thick, coated
and uncoated
- runs a variety of 1"
tabs: paper & clear, circles & rectangles, with or
without tractor holes
- built-in waste take-up
spool
- weighs 47 pounds
- measures 10"l x
17"h x 21"w
- uses 115 volts 2 amps 60
Hz or 230 volts 1 amp 50 Hz
- goes in-line with ACCUFAST
and other tabletop Labelers and Printers
- its outstanding feature is
its ability to run
virtually any 1"
tab, and tab virtually any piece
|
|
Click
to enlarge |
One
pass tabbing -
the
ACCUFAST
KT
Tabber |
|
